Electronics manufacturing services
Electronics manufacturing services (EMS) is a term used for companies that design, manufacture, test, distribute, and provide return/repair services for electronic components and assemblies for original equipment manufacturers (OEMs). The concept is also referred to as electronics contract manufacturing (ECM).[1]
Many consumer electronics are built in China, due to maintenance cost, availability of materials, and speed as opposed to other countries such as the United States.[2] Cities such as Shenzhen and Penang have become important production centres for the industry, attracting many consumer electronics companies such as Apple Inc.[3] Some companies such as Flex and Wistron are original design manufacturers and providers of electronics manufacturing services.
History
The EMS industry was initially established in 1961 by SCI Systems of Huntsville Alabama. The industry realized its most significant growth in the 1980s; at the time, most electronics manufacturing for large-scale product runs was handled by the OEMs in-house assembly. These new companies offered flexibility and eased human resources issues for smaller companies doing limited runs. The business model for the EMS industry is to specialize in large economies of scale in manufacturing, raw materials procurement and pooling together resources, industrial design expertise as well as create added value services such as warranty and repairs. This frees up the customer who does not need to manufacture and keep huge inventories of products. Therefore, they can respond to sudden spikes in demand more quickly and efficiently.[4]
The development of surface mount technology (SMT) on printed circuit boards (PCB) allowed for the rapid assembly of electronics. By the mid-1990s the advantages of the EMS concept became compelling and OEMs began outsourcing PCB assembly (PCBA) on a large scale. By the end of the 1990s and early 2000s, many OEMs sold their assembly plants to EMSs, aggressively vying for market share. A wave of consolidation followed as the more cash-flush EMS firms were able to buy up quickly both existing plants as well as smaller EMS companies.
Market segments
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a2/Electronic_Printed_Circuit_Board.jpg/220px-Electronic_Printed_Circuit_Board.jpg)
The global market for Electronics Manufacturing Services (EMS) reached an estimated value of US$504.2 billion in 2023 and is projected to grow at a CAGR of 4.94% during the forecast period 2024-2030, reaching a revised size of US$707.5 billion by 2030.[5] The EMS industry is commonly divided into Tiers by their revenue:[6]
- Tier 1: >$5 Billion
- Tier 2: $500M to $5B
- Tier 3: $100M to $500M
- Tier 4: <$100M
There is no hard rule on the actual revenue designation at this time. Other categories have been suggested by StepBeyond/EMSinsider and CIRCUITS ASSEMBLY: Micro Tier (<$50M); Tier 4 <10m and "Tier Mega" referring to the Big 2, Foxconn and Flex.[citation needed]
Another distinction is drawn between EMS that specializes in High Mix Low Volume (HMLV) and High Volume Low Mix (HVLM). Mix refers generally to the complexity or different models of the PCB assembly. Volume refers to the number of units built, with products like consumer electronics on the high end and prototype, medical electronics or machinery on the low end. Typically, lower Tier EMS provide HMLV and higher Tier provide HVLM.[citation needed]
During technology's late-1990s heyday, EMS players routinely acquired assets in high-cost locations. EMS players largely focused on printed circuit board fabrication, leaving system assembly to the OEMs. EMS companies largely disdained industries outside the world of information processing (computers) and communications. In recent years, EMS players have shifted production to low-cost geographies; embraced non-traditional industries including consumer electronics, industrial, medical and instrumentation; and added substantial vertical capabilities, stretching from design and ODM through system assembly, test, delivery and logistics, warranty and repair, network services, software and silicon design, and customer service.[citation needed]
EMS has also started to provide design services used in conceptual product development advice and mechanical, electrical and software design assistance. Testing services perform in-circuit, functional, environmental, agency compliance, and analytical laboratory testing. Electronics manufacturing services are located throughout the world and provide numerous benefits.[7] They vary in terms of production capabilities and comply with various quality standards and regulatory requirements.
E2MS
E2MS (Electronic Engineering Manufacturing Service) refers to the strategy of integrating product development, prototyping and industrialization services into a traditional EMS business, with the aim to harness potential synergies. A typical E2MS offering will start in the design phase, then continue to support the client in development, prototyping, tooling and production all the way to the testing phase, allowing for faster ramp-up as the product is prepared for mass-production up-front.
The term E2MS was first coined by Escatec and has since been adopted by numerous Tier 2 and Tier 3 producers.[8] Larger companies (Tier 1) have gone even further and offered full concept to mass-production and often taking a stake in the intellectual property, becoming more similar to ODM companies.
References
- ^ Lüthje, Boy (2002). "Electronics Contract Manufacturing: Global Production and the International Division of Labor in the Age of the Internet". Industry and Innovation. 9 (3): 227–247. doi:10.1080/1366271022000034471. S2CID 153359373.
- ^ Baker, Phil (11 August 2014). "Why can't the US build consumer electronic products?". San Diego Source. Archived from the original on 21 April 2019. Retrieved 9 September 2014.
- ^ Gamble, Craig (22 August 2014). "Shenzhen in China becomes a power source for the electronics industry". Brisbane Times. Archived from the original on 25 August 2014. Retrieved 9 September 2014.
- ^ "The new rules for global supply chain management ( Manufacturing Business Technology )". www.mbtmag.com. Archived from the original on 23 April 2007. Retrieved 17 January 2022.
- ^ "Electronics Manufacturing Services Market Size & Forecast to 2030". PragmaMarketResearch. Retrieved 2024-05-14.
- ^ "What is Electronics Manufacturing Services (EMS): [Guide to Application, Contracting and Opportunity] | TT Electronics". www.ttelectronics.com. Retrieved 2024-05-16.
- ^ Paul Anastasio. "Benefits & Applications of PCB electronic manufacturing services".
- ^ Betz, Fredrick (2010). Creating and Managing a Technology Economy. World Scientific. ISBN 978-981-4313-38-4.
- v
- t
- e
- See also
- Largest IT companies
- Electronics manufacturing services
- Original design manufacturer
- Original equipment manufacturer