Pearl River Tower
Skidmore, Owings & Merrill
Guangzhou Chengzong Design Institute
Pearl River Tower (Chinese: 珠江城大厦; pinyin: Zhūjiāng chéng dàshà; or Chinese: 珠江大厦; pinyin: Zhūjiāng dàshà) is a 71-story, 309.6 m (1,016 ft),[5] clean technology neofuturistic skyscraper at the junction of Jinsui Road/Zhujiang Avenue West, Tianhe District, Guangzhou, China. The tower's architecture and engineering were performed by Skidmore, Owings & Merrill with Adrian D. Smith and Gordon Gill (now at their own firm, AS+GG) as architects.[6] Ground broke on the tower on 8 September 2006 and construction was completed in March 2011. It is intended for office use and is partially occupied by the China National Tobacco Corporation.[7]
Architecture and design
The design of the Pearl River Tower is intended to minimise harm to the environment and it will extract energy from the natural and passive forces surrounding the building.[8] Major accomplishments are the technological integration of form and function in a holistic approach to engineering and architectural design.[9]
Sustainability
Energy-Saving Strategies
There were four steps in the approach to the Pearl River Tower's high-performance design: reduction, absorption, reclamation, and generation. These steps were put in place to achieve the goal of being a zero-energy building.
1. Reduction – This includes using low discharge ventilation, daylight responsive controls, radiant cooling, demand-based ventilation, and high-performance glazing.
2. Absorption – This includes using wind turbines, daylight responsive controls, and integrated Photovoltaics.
3. Reclamation – This stage includes using exhaust air heat recovery and chillers.
4. Generation – This final stage works to achieve the objective of being a zero-energy building by creating sufficient energy on-site through the use of microturbines.[10]
Wind Turbines
The Pearl River Tower's design enables it to funnel wind through four large wind turbines to generate up to 15 times more energy than regular freestanding turbines.
Alongside creating the power required for the building to operate, another benefit to this design is that the wind is re-routed through the tower's ventilation system, filtering it through the ceiling and floor spaces throughout the building.
As well as being designed to tunnel the wind in the most efficient way, the tower was built so its widest side faces the direction of the wind, allowing it to capture the most wind possible and thus generate the most energy.[11]
Winds in Guangzhou are relatively predictable, coming from the south for 80% of the year and coming from the north for the remaining 20%. This meant that the wind turbines' success could be maximized by considering the building's wind loads. To make the most of the prevailing wind direction, it was essential to place the building's broadest face at a perpendicular angle to the prevailing wind.[12]
Turbine Usage
The building was designed to generate power as efficiently as possible. To achieve this goal, the Pearl River Tower was built to direct incoming wind into vents that lead to its turbines. Explicitly sculpted to guide wind into the turbines, this 71-story building[13] works to ensure there is almost always clean energy being generated.[14]
Cooling
Due to Guangzhou's climate, cooling is an essential part of keeping those within the building comfortable. As the heat increases to higher temperatures in the warmer months, the radiant ceiling system works to cool the office spaces. Another part of the cooling system design is the use of cladding on the broad faces of the building. Using cavities in the walls to trap hot air from the building's exterior, the air runs through the raised floor system and pushes the heat to specific areas where it can be collected and used effectively.[12]
High-Efficiency Lighting
To avoid unnecessary energy expenditure, artificial lighting is only used in the building when necessary. When used, the highest-efficiency light bulbs on the market provide lighting for the building without requiring large amounts of electricity to function. The ceiling panels are built in a curved shape to allow the light to be dispersed evenly throughout the rooms, reducing the amount of power needed to light a given space fully.[15]
Solar Heat
The Pearl River Tower has advanced double glazing that allows natural light to enter the building. There is a double-skin façade in place, meaning the walls have two layers: the outer skin has a high permeability for solar heat to allow it in, while the inner skin prevents solar gain. This is referred to as a double curtain wall. There is a ventilation corridor between the two layers. The layers automatically adjust to allow heat in or out as required. The result of this design is that the building is more thermochemically efficient. It helps keep the building at the desired temperature regardless of the weather without using large amounts of energy to pump artificially created hot or cold air into the building.[16]
The heat that is trapped between the two skins rises, creating natural ventilation. Initially, the building design aimed to create a positive-energy building, meaning it would generate excess power that could be sold to the electrical grid. Complications with fire codes and regulations resulted in the original design being amended. In its final state, the 212,165 m2 building uses around 40% of the energy that a building of its size would typically use.[11]
Triple Glazing
The glass on the exterior of the building has three layers of glazing applied to it. This glazing traps heat within the building, keeping it warmer during the winter. If the heat becomes excessive, it is easily vented out using the tower's built wind-powered ventilation system.[17]
Photovoltaic Cells
The shading system on the exterior of the tower has photovoltaic cells incorporated in its design. The purpose of these cells is to absorb solar energy, much like the panels on the top of the tower. This has the effect of increasing the tower's ability to power itself with clean energy by reducing the need for it to draw from the local power grid. This adds to the tower's already considerable power-saving capabilities caused by the wind and solar power used in other parts of the building.[18][17]
Reused Heating
When coolers are used for air conditioning, the hot water created as a byproduct is then used throughout the building. This reduces water demands and makes the building more sustainable overall.[19][20]
Daylight Responsive Blinds
The blinds on the tower's exterior automatically open or close depending on the building's lighting needs. This maximizes the amount of light inside the building when needed while preventing an excess of light from blinding those insides. This is consistent with other sustainable, efficient aspects of the tower's design, as it prevents excessive artificial light usage and, in turn, prevents unnecessary power draw.[21]
Influence
The Pearl River Tower is designed to be one of the most environmentally friendly buildings in the world.[22]
Of Pearl River Tower’s accomplishments, many are related to the sustainable design features include:
- The largest radiant-cooled office building in the world
- Most energy efficient super-tall building in the world
- The tower is an example of China’s goal to reduce the intensity of carbon dioxide emissions per unit of GDP in 2020 by 40 to 45 percent as compared to the level of 2005.[23]
In a report presented at the 2008 Council on Tall Buildings and Urban Habitat it was reported that the building's sustainable design features will allow a 58% energy usage reduction when compared to similar stand alone buildings.[24] The building would have been able to be carbon neutral and actually sell power back to the surrounding neighborhood if the micro-turbines had been installed into the building. However the local power company in Guangzhou does not allow independent energy producers to sell electricity back to the grid. Without the financial incentive to add the micro-turbines the developers removed them from the design. If they had been added excess power would have been produced from the building, at the very least, after office hours when the power needed by the building itself had been reduced.[24]
Timeline
- Fall 2005: Design Competition
- 8 September 2006: Ground Breaking Ceremony
- November 2006: Enabling Works begin
- 18 July 2007: Public bidding for the construction[25]
- January 2008: Main Package construction begins −26.2 m (−86 ft)
- August 2008: Building Core construction reaches ground level 0 m (0 ft)
- April 2009: 15th Level 80.6 m (264 ft)
- November 2009: Glass curtainwall installation begins
- December 2009: Building reaches upper wind turbine level
- 28 March 2010: Topped-out[26]
References
- ^ "Pearl River Tower". CTBUH Skyscraper Center.
- ^ "Emporis building ID 275364". Emporis. Archived from the original on March 4, 2016.
- ^ "Pearl River Tower". SkyscraperPage.
- ^ Pearl River Tower at Structurae
- ^ a b "Projects: Pearl River Tower". Skidmore, Owings & Merrill. 2012. Retrieved 26 April 2016.
- ^ Smith, Adrian (2007). The Architecture of Adrian Smith, SOM: Toward a Sustainable Future. Images Publishing Group Pty Ltd. p. 556. ISBN 978-1-86470-169-2.
- ^ "The winds of change". World Architecture News. 22 August 2006. Archived from the original on 19 October 2014. Retrieved 23 May 2012.
- ^ "Net Zero Energy Design". SOM. Archived from the original on 1 April 2009. Retrieved 11 April 2009.
- ^ Kyra Epstein (Winter 2008). "How Far Can You Go? Case Study: Pearl River Tower". High Performing Buildings Magazine. Retrieved 2 May 2012.
- ^ Frechette, Roger; Gilchrist, Russell. Towards zero energy: A case study of the Pearl River Tower, Guangzhou, China (PDF). CTBUH: Proceedings of the council on tall buildings and urban habitat’s 8th world congress. Dubai. pp. 7–16.
- ^ a b Al-Kodmany, Kheir (2016). "Sustainable tall buildings: Cases from the global south". International Journal of Architectural Research. 10 (2): 52–66.
- ^ a b Baker, W.; Besjak, C.; McElhatten, B.; Li, X. (2014-04-02). "Pearl River Tower: Design Integration towards Sustainability". Structures Congress 2014. Reston, VA: American Society of Civil Engineers: 747–757. doi:10.1061/9780784413357.067. ISBN 978-0-7844-1335-7.
- ^ "One of the world's greenest skyscrapers approaches completion". New Atlas. 2010-04-01. Retrieved 2024-02-13.
- ^ SOM. 2020. Pearl River Tower- Sustainable Design. Available at https://www.som.com/projects/pearl_river_tower__sustainable_design Retrieved December 3, 2020.
- ^ AEI Professional Project Awards. 2014. Pearl River Tower. ASCE. Available at https://www.asce.org/uploadedFiles/Technical_Areas/Architectural_Engineering/Content_Pieces/SOM_Chicago_Pearl%20River.pdf
- ^ "How Do Double-Skin Façades Work?". ArchDaily. 2019-08-20. Retrieved 2024-02-13.
- ^ a b "Where Is Pearl River Tower And How It Work". Some Interesting Facts. 2013-02-23. Retrieved 2024-02-13.
- ^ "Chapter 11: Onboard Systems - NASA Science". science.nasa.gov. Retrieved 2024-02-13.
- ^ "Pearl River Tower | Ongreening". ongreening.com. Retrieved 2024-02-13.
- ^ "Heat Recovery Chillers | Carrier Commercial Systems North America". Carrier. Retrieved 2024-02-13.
- ^ "Pearl River Tower - The Skyscraper Center". www.skyscrapercenter.com. Retrieved 2024-02-13.
- ^ Pearl River Tower at Glass Steel and Stone (archived)
- ^ "China to cut 40 to 45% GDP unit carbon by 2020". China Daily. 26 November 2009. Retrieved 23 May 2012.
- ^ a b Frechette, R; Gilchrist, R (March 2008). "Towards Zero Energy: A case study of the Pearl River Tower, Guangzhou, China". Council on Tall Buildings and Urban Habitat: 9. Archived from the original on May 26, 2016. Retrieved November 14, 2013.
- ^ "Guangzhou, the third high-rise tender requirements super energy-saving". Yangcheng Evening News. 18 July 2007. Retrieved 11 April 2009.
- ^ "SOM-Designed Pearl River Tower Topped Out in China". Archived from the original on 2010-04-04.
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- SOM's Pearl River Tower Page
- AS+GG's Pearl River Tower Page
- Consulting Services performed by RWDI
- v
- t
- e
Under construction | |||||||||
---|---|---|---|---|---|---|---|---|---|
|
On hold | |
---|---|
|
- See also
- Proposed supertall skyscrapers
- List of architects of supertall buildings