RAM press
A RAM press (or ram press) is a machine, invented in the USA in the mid-1940s, that is used to press clay into moulded shapes, such as plates and bowls. In operation a slice of de-aired clay body is placed in between two shaped porous moulds, and vertical movement of the moulds presses the body into the required shape.
History
The RAM process was devised around 1945 by the ceramics engineers Andrew Reif Blackburn and Richard E. Steele. The first RAM Press was made by Harold Dawson in Columbus, Ohio. Blackburn and Steele sold their company to the Wallace Murray Corp. RAM Products Inc. of Columbus, Ohio was set up in 1979 and now manufactures the RAM press, as do other companies. In 1986, RAM Products introduced the 15-ton cub press for use by studio potters.[1]
Principle of operation
In operation a slice of de-aired clay body is placed in between two shaped porous moulds or dies, and vertical movement of the moulds presses the body into the required shape. Pressing causes some water to be forced out of the clay body into the porous die, which stiffens the clay body allowing it to retain its shape. The dies used for RAM pressing are porous and have embedded air channels which allow pressurized air to be forced through the permeable die material to separate the pressed ceramic ware from the die. After pressing, air is forced through the bottom die as the press is opened. This causes the part to be released from the bottom die while adhering to the top die. Once the die is fully open, air is forced through the top die which releases the part onto a tray or into the operator’s hands. [2] [3] Dies are typically made from high strength gypsum cement, but may also be made from porous ceramic.
Other uses
The phrase ram press (in lower case) commonly means the same thing; it is simply used for machines that press items by a mechanical ram, such as with a plunger, piston, force pump, or hydraulic ram.
References
- ^ Pelleriti, Richard (July 1998) "History of the RAM Process". Ceramic Industry magazine.
- ^ Blackburn, A.R. (1950). "Plastic Pressing ... a new production tool for the ceramics industry". American Ceramic Society Bulletin. 21 (6): 230–234.
- ^ US Patent 3,010,176, A.R. Blackburn & R.E. Steele, "Method for Molding Ceramics", issued 1961-11-28
External links
- Ram Press Manufacturer Site
- v
- t
- e
- Clay
- Feldspar
- Frit
- Kaolinite (china clay)
- China stone
- Petuntse
- Slip
- Bone ash
- Ash glaze
- Lead-glazed
- Tin-glazed
- Salt glazed
- Lusterware
- Pinching
- Coiling
- Moulding
- Wheel throwing
- RAM pressing
- Slip casting
- Burnishing
- Glazing
- Kiln
- Firing
- Biscuit firing (biscuit porcelain)
- Saggar
- Pit fired pottery
- Slipware
- China painting
- Blue and white pottery
- Celadon
- Black-figure
- Red-figure pottery
- Malwa culture
- Jorwe ware
- Black and red ware culture
- Painted Grey Ware culture
- Northern Black Polished Ware
- Rang Mahal culture
- Kakiemon
- Sea pottery
- China
- Ancient Greece
- Ancient Rome
- Pre-conquest Americas
- Maya
- Japan
- Korea
- Islamic
- Persia
- Delftware
- Faience
- Tilework
- Studio pottery
- Individual works
- List of studio potters
- Potters by nation